Common Safety Mistakes

Some of the most dangerous situations arise out of common mistakes that can be easily avoided. Today we are going to focus on some of the more common (and commonly overlooked) safety issues that should be prevented to help improve safety performance.

Common Safety Mistakes:

  • Lack of housekeeping: It may seem simple, but a messy/dirty work area makes for an unsafe work environment. Tools laying around, spilled oil and obstructed walkways all result in thousands of injuries each year.
  • Not using Lockout/Tagout on equipment needing repair: Thousands of injuries are caused each year by the failure to lockout or tagout equipment and machinery needing repair. Often times someone knew ahead of time that the equipment was not functioning properly. It is imperative to disable to equipment as soon as someone knows it is not functioning properly. This will ensure the equipment does not cause injury or an unsafe work environment.
  • Improper use of Personal Protective Equipment (PPE): It is a common, yet incorrect practice to wear hard hats backways, or to put hearing protection in improperly. A walk around the shop might find face shields that are scratched to the point where visibility is poor. All of these are examples of failures in the proper use of Personal Protective Equipment. PPE is the last line of defense in protecting the employee. Therefore, the improper use of PPE, or failure to maintain and replace defective PPE, increases the likelihood of injury.
  • Not having a process or plan: Most workplace injuries occur when work being done is not part of a normal process. It is important to have a work plan for non-process work. Sometimes such a plan is called a Task Specific Safety Plan. N matter how it is done, planning the work and asking, “What is….?” Questions will help identify hazards and implement controls to prevent injuries.
  • Failure to communicate: One of the easiest things to prevent unsafe conditions is to discuss what hazards or unsafe acts have been noticed. Communicating the hazards and failures in processes is an essential element of protecting ourselves and our coworkers from the hazards that potentially exist in the workplace

Questions to Generate Discussion

  • What is one common safety hazard you have encountered on the jobsite?
  • Can you give an example of when you did not follow a process or plan and as a result created a safety hazard?
  • Think of one improvement that would reduce common safety hazards.